Fatbar (Off-Road Motorcycle) Handlebars - Extra Information

Important Product Warnings

This product must be fitted by a qualified mechanic
Do not use this product following a crash, or if the product is damaged or marked in any way
Do not attempt to straighten bars if they become bent
Remove any burrs from contact edge of bar mount before Installation
It is essential that 1-1/8in(28.6mm) diameter bar mounts are used
Do not damage the handlebar during installation
After installation ensure steering is not disrupted
Do not modify the handlebars
Do not mark the handlebar. Physical marking of the handlebar will lead to stress raisers which could lead to a fatigue failure
Do not drill into or modify bars and bar mounts
Do not install after-market end plugs or handguards that mount using internal expanding end plugs
Do not modify 7/8" clamps to fit 1-1/8in (28.6mm) handlebars
Do not clean the handlebar with any form of metal polish / concentrated cleaning fluids
Do not use the handlebar as a mounting point when transporting the motorcycle
Renthal Handlebars are warranted against defects in material and craftsmanship. Normal wear and tear is not warranted, including bending as a result of a crash
Failure to comply with the warnings and installation instructions can result in complete product failure

End of Life

Renthal® Fatbar Handlebars are primarily made of aluminium and are easily recyclable at metal recycling centres, often found or collected at municipal waste and recycling facilities. If the handlebar becomes damaged or comes to the end of it's useful life we recommend you recycle the bar using metal recycling facilities.