Twinwall - Extra Information

Important Product Warnings

• This product must be fitted by a qualified mechanic
• Do not use this product following a crash, or if the product is damaged or marked in any way
• Do not attempt to straighten bars if they become bent
• In the very unlikely event that a crack appears in the outer wall of the handlebar, it is essential that the handlebar is changed. This is necessary even though the crack in the outer wall will not propagate to the inner wall
• Only fit this product using a calibrated torque wrench
• Do not exceed 18Nm when tightening bar mounts
• Exceeding 18Nm will damage the handlebar, if you exceed 18Nm Renthal recommend you replace the handlebar
• Remove any burrs from contact edge of bar mount before Installation 
• It is essential that 1-1/8”(28.6mm) diameter bar mounts are used
• Do not damage the handlebar during installation
• After installation ensure steering is not disrupted
• Do not modify the handlebars
• Do not mark the handlebar. Physical marking of the handlebar will lead to stress raisers which could lead to a fatigue failure
• Do not drill into or modify bars and bar mounts
• Do not remove or modify the rubber seals
• Do not modify 7/8" clamps. It is essential that 1 1/8" mounting clamps are used
• Do not power wash the rubber seals at close range
• Do not clean the handlebar with any form of metal polish / concentrated cleaning fluids
• Do not use the handlebar as a mounting point when transporting the motorcycle
• Renthal Handlebars are warranted against defects in material and craftsmanship. Normal wear and tear is not warranted, including bending as a result of a crash
• Failure to comply with the warnings and installation instructions can result in complete product failure

End of Life

Renthal® Twinwall Handlebars are primarily made of aluminium and are easily recyclable at metal recycling centres, often found or collected at municipal waste and recycling facilities. If the handlebar becomes damaged or comes to the end of it's useful life we recommend you recycle the bar using metal recycling facilities.

Recycling Information