Revo-DHC - Extra Information

Important Product Warnings

• This product must be fitted by a qualified mechanic
• Do not use this product following a crash, or if the product is damaged or marked in any way
• Not for road use
• Check the pedal is tightened with the correct torque before every ride
• Inspect the pedal for damage before each ride, if in any doubt do not ride the pedals and contact Renthal
• If you are not sure about how to set the pin length on the pedals, consult a qualified mechanic
• Use only SPD-compatible shoes with this product
• Do not use if shoe sole interferes with pedal body or binding
• Only compatible with Renthal PDS-05 cleats and Shimano SPD pattern cleats
• Check binding and cleat are free from foreign objects, prior to using
• Check cleats periodically for wear. If worn, replace them, and adjust the spring tension before riding
• Only a qualified mechanic should remove or disassemble the bindings
• Failure to comply with the warnings and installation instructions can result in complete product failure.

End of Life

Renthal Revo-DHC Pedals are made from a variety of materials, most of which are recyclable.

Pedal body and end cap are made of aluminium. The axles, pins, retaining clip bearing and retaining nut are all steel.

Both aluminium and steel are easily recyclable at metal recycling centres, often found or collected at municipal waste and recycling facilities.

The Igus is made from polymer and currently not recyclable.

The seals are nitrile rubber which is not currently recyclable.

Recycling Information