We are initiating a voluntary product recall on all Gen 1 and Gen 2 Clip-On handlebars. The recall is due to a potential for product failure due to stress corrosion cracking.

What to do next?
Follow the instructions below for identifying your model of Clip-On. If you have either of the effected models you should stop using them immediately and return them to us for a free replacement set.

Free of charge Return
To return your Clip-Ons we are providing free shipping. Simply fill out the Returning Clip-Ons form at the bottom of this page, you will then be emailed details of how to obtain the free shipping label. Once we receive your old Clip-Ons we will ship your new Clip-Ons.

For more information about this recall please checkout the FAQ

Identifying Your Clip-Ons

  • Gen 1

    Must be returned if Week/Date code is older than 31 17 or blank.
    See FAQ #21 for explanation

    • Conventional design
    • 39mm Offset
    • Launched 2009

  • Gen 2

    These Clip-Ons must be returned.

    • Screw mounted arm design
    • 2 Screws on front
    • 20mm Offset
    • Launched 2013

  • Gen 3

    These Clip-Ons are not affected and can continued to be used.

    • Threaded arm design
    • 20mm Offset
    • Launched 2017