Important Product Warnings
- Please note Renthal clip-on handlebars are primarily designed for race use and may not fit to a standard bike without other modifications.
- Ensure cables, hoses and electrical lines do not interfere with the machine steering or other controls
- Ensure clip-ons allow room for riders hands over the full steering range.
- Use the correct clamp on each side of the forks, laser marking on clamps MUST face up
- Ensure all clutch, master cylinder and clamps are free of sharp edges where they come in contact with the bars
- Do not centre punch, drill into or modify bars and clamps
- Check and reapply torques after 2hrs of riding
- Do not attempt to straighten the handlebars if they become bent as the result of a crash
- In the event of a severe crash, replace the clip-ons
Recycling
Clip-On Foam
Disposal : General Waste - Check Local Guidelines
Material : PU
Extra : Made from Polyurethane Foam. Requires specialist recycling facilities to be recycled.
Clip-On Insert Card
Disposal : Paper Collection - Check Local Guidelines
Material : Paperboard
Lever/Clip-On Box
Disposal : Plastic Collection - Check Local Guidelines
Material : PET